User manual logic pro x free. Apple Logic Pro X User Manual – Download

Looking for:

User manual logic pro x free.Please wait while your request is being verified…

Click here to Download


Rename each channel as you go, so you know which channel is which in Satellite Sessions. That means it will capture the audio after processing by compressors, EQs, effect plugins etc if Satellite Audio is placed after such plugins.

To capture the dry signal, place Satellite Audio before any processing plugins. Here is how to get started: Download and install Satellite Sessions from mixedinkey.

Create New Session Enter a name for the Session. You will be prompted to enter the Key and Scale of your project. Leave blank if undecided. Changes to the bpm or sample rate in your project will generate a Sync button in Satellite Sessions. You are the Host of the session. Any pre-shared audio stems will be visible and audible in your Satellite Sessions plugin. Press play in Logic to play the stems inside Satellite Sessions.

They do not need to be downloaded to Logic to be heard, and only you can hear what you are listening to. If you wish, download any stems in the Session to your Logic project by dragging the top-right corner of each stem to a spare audio channel. Session Dashboard Access and load your previous sessions here. Access your invitation history. Capturing Audio Add Satellite Audio to any channel you wish to share. Satellite Audio can be placed after a Software or External Instrument, or as an insert Audio Unit on an Audio channel, anywhere in the insert chain.

You can trigger Software Instruments, or audio samples, or play External Instruments live into your Satellite Audio-enabled channel s. Sharing Audio Anyone in your Session can now listen to, or download, all stems in the Session. Previous Next.



One moment, please

Blink Smart Security for Every Home.


User manual logic pro x free.Logic Pro X: The Beginner’s Guide


Customer reviews. How customer reviews and ratings work Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them. Learn more how customers reviews work on Amazon. Images in this review. Reviews with images. See all customer images. Top reviews Most recent Top reviews. Top reviews from the United States. There was a problem filtering reviews right now.

Please try again later. Verified Purchase. Also, no index in a book that is supposed to be a reference to a multifaceted, complex program? Very useful! This graphically enhanced manual really is superior to anything I’ve ever tried to read in the realm of a software tutorial book. Edgar explains things really well and the use of the numbering system to bring you exactly to where in the graphic the words on the page are describing is really a wonderful tool.

I would encourage Edgar in the future to use different shapes and colors for these link symbols. The book I purchased utilizes numbers 1 thru whatever may be necessary in a black circle. It is sometimes difficult to find the number in the graphic and perhaps if different colors or shapes were used that might be easier but this is still a 5 star book.

This book is far and away the best explanation of Logic Pro that I have found. Logic has the deserved reputation for being a powerful but obscure program, especially to non-professional musicians like me. The book begins with an explanation of Logic’s architecture using an excellent analogy, and I found understanding the architecture to be key to understanding Logic’s multifaceted and obscure UI.

While this old document has many typos, it is also an excellent description of how Audio Midi Setup works, especially with regard to Network MIDI connections. After many attempts to get it working, Edgar’s explanation helped me understand the architecture of this as well. Get this book, and get the MIDI description from his website. You won’t regret it. I must say, these GEM books are amazing, so much better than all the other Logic books that I’ve seen that just explain one feature after another and are often very dry to read through.

Their visual approach is more engaging and I actually understand the features and functionality and can implement them right away. This makes the learning process so much easier, and there is a lot to learn. If you want to learn Logic I can highly recommend this book. I’m in the process of switching from DP to Logic and came across these books in the Graphically Enhanced Manuals series.

One thing I realized right away are all the graphics and diagrams that you usually don’t find in a typical user manual for software apps. I know how a sequencer works, but I had to find out how Logic works differently than the one I’m used to.

Those diagrams make it very clear and I’m up and running in no time. Its visual!! This is the way to learn an app. Highly recommended. Logic Pro project notes interface You can create, view, and edit notes for a project in the Project Notes pane. Each project can contain one set of project notes.

You can also double-click the Project Text area. Open the Project Notes pane Do one of the following:. Logic Pro track notes interface You can create, view, and edit notes for each track in the Track Notes pane. You can also double-click the Track Text area. Open the Track Notes pane Do one of the following:.

For more information about track notes, see Add track notes in Logic Pro. You can use it to make precise edits, and for other tasks better suited to numeric rather than graphic edits. You can display all events or limit them by category. This view lets you see all regions in the current project. For more information, see Logic Pro Event List editor overview.

You can create, select, and edit markers in the Marker List, and click a marker name to move the playhead to that marker position. Use this area to enter or edit text for the selected marker. Open the Marker List Do one of the following:. Logic Pro Tempo List interface The Tempo List displays all the tempo events in the project, and lets you create and edit tempo events.

Logic Pro Signature List interface The Signature List shows all the time and key signature changes in your project, as well as any score symbols in the project score. You can create, copy, move, and delete time and key signature events in the Signature List. You can browse for loops or search using various criteria, preview matching loops, and add them to your project by dragging them into the Tracks area. Matching loops appear in the results list below. Click a loop to preview it, and drag a loop from the results list into the Tracks area to add it to your project.

Logic Pro Project Audio Browser interface The Project Audio Browser shows the audio files used in the project, and displays an overview of the regions derived from each audio file. You can add, edit, delete, and rename audio files and regions in the Project Audio Browser. Click the disclosure triangle to the left of an audio file to reveal regions associated with the file.

Also indicates file length using horizontal bars. Colored sections indicate the location and size of regions within the audio file. The Info column can also display waveform overviews. Click again to stop playback. Use in combination with the Play button. Open the Project Audio Browser Do one of the following:.

You can also import GarageBand projects into the current project. Click the plus button to display additional search filters that allow you to narrow your search further. Results are displayed in the File list below. Open the All Files Browser Do one of the following:. A project is the document that contains all your recordings, the location of media files you add, and all the changes you make. You can have multiple projects open at the same time, and transfer media and other data between them.

Projects can also contain assets including audio files, a movie file, instruments, and other files. You can save assets with the project or reference them in another location. When Show Advanced Tools is selected in the Advanced preferences pane, you can save a project as either a single file package , or as a project folder containing the project file and subfolders for project assets. The basic elements of a Logic Pro project include the following:.

Tracks The horizontal rows in the Tracks area are called tracks. Tracks help you organize and control the sound of the recordings, loops, and other material in a project. You record your performances on tracks, and arrange the regions representing the recordings, loops, and other material in a project on tracks. There are several types of tracks you can use in a Logic Pro project:. Folder tracks are not assigned to a channel strip in the Mixer.

There are additional track types that do not contain regions, including auxiliary aux and output tracks, used for routing the output of other tracks; global tracks, used to control aspects of the overall project; and the master track, which you can use to control the overall volume level of the project.

For information about working with global tracks, see Logic Pro global tracks overview. Regions Regions are the building blocks of a project.

Each time you make a recording, drag an Apple Loop to the Tracks area, or add a media file to your project, a region representing the recording or file appears in the Tracks area.

Different types of regions correspond to different track types and types of material. An audio region can represent the entire audio file or only a portion of one. When you edit the region in the Tracks area or the Audio Track Editor, the original audio file is not changed. They are stored as part of the project, but can also be saved as individual files.

In the Tracks area, you can move, copy, and work with both audio and MIDI regions in a variety of ways to build your arrangement. When Show Advanced Tools is selected in the Advanced preferences pane, you can edit the source audio files for audio regions in the Audio File Editor.

For more information about working with regions, see Logic Pro regions overview. Patches You can control the sound of the tracks in your project using patches.

A patch can contain one or more channel strips, each with its own settings and plug-ins, as well as a set of Smart Controls. Patches can also contain auxiliary channel strips for more complex routing. Custom patches can be saved in the Library.

For more information about working with patches, see Logic Pro patches overview. Channel strips Each track in a project is represented and controlled by a channel strip corresponding to the track type. Channel strips contain controls to adjust the volume level and pan position of the track, mute and solo the track, insert plug-ins, route the output signal, and control the track in other ways. You can view and edit the channel strips for a project in the Mixer.

In addition to track channel strips, projects contain output channel strips and a master channel strip which controls the overall volume of the project. They can also contain auxiliary channel strips, which are used to route the output from multiple tracks to a single destination.

For more information about working with channel strips in the Mixer, see Overview of mixing in Logic Pro. Plug-ins Logic Pro includes a collection of professional-quality plug-ins you can use to shape the sound of your recordings and other material.

There are several types of plug-ins used in Logic Pro channel strips: MIDI plug-ins, effects plug-ins, and instrument plug-ins. In general, they modify the sound the input signal of the channel strip. For more information about working with instrument and effects plug-ins, see Overview of plug-ins in Logic Pro.

The contents of each window update to show your latest changes. Only one window can have key focus at a given time, this is called the active window.

When several normal windows overlap, the active window is the window in the foreground. The title of the window with key focus is black the titles of other open windows are gray. Inside a window, the area with key focus for example, the Tracks area is bordered by a blue frame. In the Logic Pro main window, different areas can be given key focus by clicking the background or title bar of the window, or by using a tool in the window.

Key commands only affect the window or area with key focus. Some areas, including the Preferences and Project Settings windows, open as floating windows in the foreground, above even the key focus window.

When one floating window covers another, click the one you want to move to the foreground. If the window is open but in the background, it comes to the foreground. Tip: The key commands for opening different working areas as separate windows are shown beside the window name in the Window menu.

When clicking in the working area, be careful not to accidentally insert an event or region if the Pencil tool is active in the window. This command assigns key focus to the next open window, if it is fully obscured by other windows. You can also cycle through working areas using Tab cycles forward and Shift-Tab cycles backward. Note: If you close all open windows of a project, Logic Pro asks if you want to save your changes.

Move and resize Logic Pro windows You can move and resize open windows individually, even across multiple monitors. You can also change the size of all window elements that feature a resize bar. The size relationship of the Tracks area and editors in the Logic Pro main window can also be adjusted, by clicking between them and dragging vertically. The pointer changes to a Resize pointer. The vertical height of the Mixer is independent of the height you set for the editors. In Logic Pro, move the pointer over the resize bar.

When the pointer turns into the Resize pointer, drag the window element. Zoom Logic Pro windows You can also zoom in to see regions or events in closer detail, or zoom out to see more of the project.

Most Logic Pro windows have zoom sliders. When you zoom in or out, the top-left and selected event or region remains in the visible area of the screen. If no selected region or event is visible, zooming is centered around the playhead. You can store three different zoom settings for each window using the Save as Zoom 1—3 key commands. Use the Recall Zoom 1—3 key commands to recall your zoomed settings. These commands only apply to the active window or window area. Dragging left increases the number of visible tracks, while dragging right increases the track height.

Dragging left shows more of the Tracks area, while dragging right zooms in for a more detailed view. Dragging down zooms in, while dragging up zooms out. Pinch open to zoom in, or pinch closed to zoom out. Zoom a section of the Tracks area using the Zoom tool 1. When the pointer is over an empty part of the Tracks area, you can simply press and hold the Option key.

The selected area fills the window. You can repeat the process to zoom in further. Save and recall zoom settings 1. In Logic Pro, adjust the zoom setting you want to store. To recall a saved zoom setting, use the corresponding Recall Zoom key command 1—3.

This action returns the zoom level to the original setting, or backtracks through previous zoom steps if the tool was used multiple times. Adjust the size of an individual plug-in window In Logic Pro, do one of the following:.

Move through display levels in Logic Pro The windows in a Logic Pro project have several display levels, with the Tracks area at the highest level, and the editors normally at the lowest level. You can work on different types of tasks, such as arranging the overall project, editing the contents of a folder, or refining individual regions, at different levels. In many cases, you can switch between these different levels directly, without needing to open or access another window.

Move one display level higher In Logic Pro, do one of the following:. In the Piano Roll and Step Editors, a step up the display hierarchy shows the events of all regions in the Tracks area. In the Event List, clicking the Display Level button moves you up one level in the display hierarchy. The display remains much the same but shows a list of regions, rather than a list of individual events, along with region positions, names, track numbers, and lengths.

The MIDI region that you were just editing is selected within the list of region names. In the Score Editor, clicking the Display Level button takes you to the higher display level.

Double-clicking a staff at an empty point , reverts to a lower display level. Control Logic Pro windows using Catch modes You can control how windows update to reflect changes to the playhead position using Catch modes. When you work in Catch mode, the visible section of a window follows the playhead during playback or recording. If the Catch button is inactive, the display does not update, even when the playhead moves past the right edge of the visible portion of the window.

You also have the option of using Catch mode together with the Scroll in Play setting. If the Catch function of the window is also activated, the playhead remains in the middle of the window, while the background scrolls smoothly from right to left. Content Catch mode is only available when Additional Options for Advanced editing is selected in the Advanced preferences pane. Turn on Content Catch mode 1. In Logic Pro, click the Catch button to turn on Catch mode. Link windows in a Logic Pro project When Additional Advanced Editing Options is selected in the Advanced preferences pane, you can independently link or unlink windows including the Tracks area, Piano Roll Editor, Score Editor, and Event List to control the relationship between what they display.

For example, you could set up two Event Lists, one showing arrange regions, and the other showing their contents, then click a region in the first Event List to update the contents of the second one. The Link mode options—Off, Same Level, and Content—allow you to control how information is displayed when working with related editor windows. In this case, the display level is always one level lower than that of the top window.

You can also use Content Link mode in one Tracks area to display the folder contents of another Tracks area. Same Level is not available. Create and recall screensets in Logic Pro You position windows in a layout that suits the way you work. This layout of various windows, including their display size, zoom levels, position, and other settings, is called a screenset.

Once defined, you can save, and freely switch between different screensets, much as you might between different computer displays. Screensets are numbered from 1 to 99 using only the 1 to 9 computer keys—the 0 key is assigned to the Stop command by default.

It happens automatically, as soon as you switch to another screenset. Thus, without any effort, your current working view is always stored as the current screenset. You can also switch a screenset automatically during playback using meta events. Create a screenset 1.

In Logic Pro, press any numerical key except 0; for example, 7. For two-digit screensets, press and hold Control while entering the first digit. Arrange your windows, including changes to zoom settings, the relationship of the Tracks area and editor, open or closed inspector and Browsers or List Editors areas, and so on. Note: When you choose a screenset number that has not been saved, a maximized main window opens.

For two-digit screensets, press and hold Shift while entering the first digit. Note: Screensets 1 to 9 can be recalled by freely defined key commands, not only the number keys on your computer keyboard. This allows you to use the number keys for other purposes, such as opening or closing windows. The 1 to 9 key commands are called Recall Screenset 1—9 in the Key Commands window. Switch a screenset during playback 1.

Set the playhead to the point where you want the screenset to change. The inserted meta event has a default value of 50 Project Select. You can stop screenset switching by muting the MIDI region that contains the meta 49 event.

For information about meta events, see Meta events in Logic Pro. A bullet appears in front of the screenset number to indicate that it is locked. Repeat the key or menu command to unlock the screenset. Copy screensets 1. In the Duplicate Screenset dialog, enter the target screenset number the screenset number that you want to copy to , and give it a name. Rename the current screenset 1. The default is the visible window names. The name is automatically updated whenever a window or view is opened or closed.

Import all screensets from another project 1. In Logic Pro, do one of the following:. Navigate to and select the project file that you want to import screensets from, then click the Import button. Note: If accessing this feature via the All Files Browser, you also need to click the Import Settings button, which appears after clicking the Import button. In the Import Settings dialog, select the Screensets option.

Revert to saved screensets in Logic Pro You can easily revert to saved screensets. Some tools are common to all working areas, while others are available only in some working areas. When you choose a tool from the Tools menu, the pointer changes to show the chosen tool. In general, you use a tool by clicking a region, note, or other item in that working area. If multiple regions are selected when you use a tool, the edits apply to all the selected regions for example, the Scissors tool cuts all selected regions at the same time position.

Where tools are available, there are two Tools menus: a Left-click and a Command-click Tools menu. You can assign separate tools to the Left-click and Command-click Tool menus. You can also assign the right mouse button if your mouse supports one. For information about assigning tools, see Assign tools in Logic Pro.

The pointer adopts the shape of the active tool, so you can quickly identify which tool is being used. The Command-click Tool menu is located on the right by default, but is located in the middle when a third Right-click tool is assigned. See Editing preferences in Logic Pro. If you have a suitable mouse, you can also assign the right mouse button to any of the following:.

You can set two different behaviors for the Pointer tool when using it in the Tracks area. Set the behavior of the right mouse button 1. Click Editing, then choose a setting from the Right Mouse Button pop-up menu. Choose the appropriate menu item to assign the tool, which is available when the right mouse button is pressed while editing.

Click a tool to choose it. When the Tool menu is open, you can also use the key shown next to a tool to select it. Note: When you choose a tool from the Tool menu by right-clicking, the tool is assigned to the left mouse button.

Right-double-clicking in the working area of the active window resets the assigned tool to the Pointer tool. Set the behavior of the Pointer tool in the Tracks area 1. Click Editing, then select the behavior you want for the Pointer tool. The Loop pointer and behavior can still be accessed in these click zones by holding down Option. Pointer tool The Pointer is the default tool when you open Logic Pro.

You can use the Pointer tool to:. You can select multiple items by holding down Shift and dragging around the items. The pointer also takes the shape of this tool when outside the working area, when making a menu selection, or entering a value. Pencil tool Use the Pencil tool to add new regions or events.

You can also select, drag, loop, and alter the length of regions or events using the Pencil tool. In the Score Editor, you can use the Pencil tool to add dynamic markings, accents, and other symbols to notes. Eraser tool Use the Eraser tool to delete selected regions or events. When you click a region or event with the Eraser tool, all of the currently selected regions or events are deleted similar to pressing the Delete key.

The Eraser tool can also delete an unselected region or event by clicking it. Text tool Use the Text tool to rename regions and other items, or add text to a score in the Score Editor. Scissors tool Use the Scissors tool to split regions and events, allowing individual sections to be copied, moved, or deleted. Glue tool Use the Glue tool to join selected regions or events into a single region or event. Solo tool Click and hold a region with the Solo tool to listen to the selected region or event apart from the rest of the project.

Moving the mouse horizontally also scrubs any events the pointer touches. You can unmute the region or event by clicking it a second time with the Mute tool. If multiple regions or events are selected, the mute state of the clicked region or event applies to all selected regions or events.

Zoom tool Use the Zoom tool to zoom in by dragging over regions or other material, or over an empty part of the Tracks area. To revert to the normal zoom level, click the window background with the Zoom tool, or click while holding Control-Option. You can also access the Zoom function by pressing and holding Control-Option, regardless of which tool is active.

Fade tool Use the Fade tool to create and edit fades, or to change the shape of fade curves. Automation Select tool Use the Automation Select tool to select automation data and create automation points at region borders. Automation Curve tool Use to Automation Curve tool to bend or reshape the curve between two automation points, creating a nonlinear transition between the points.

Marquee tool Use the crosshair-shaped Marquee tool to select and edit parts of regions. In the Tracks area, you can select part of a region or regions with the Marquee tool and apply selection- based processing with audio effects.

Flex tool Use the Flex tool for quick access to fundamental Flex editing functionality, without having to turn on Flex view in the Tracks area. Tools for specific working areas Tools specific to a particular editor or other working area are covered in the respective chapters for that working area.

Logic Pro advanced tools and options Logic Pro X provides the power and flexibility of previous versions of Logic Pro, while allowing you to turn groups of features on or off to streamline your workflow. For experienced users who have upgraded from Logic Pro 8 or 9 or Logic Express 8 or 9 , all advanced tools and additional options are turned on by default.

When you open an existing project in Logic Pro X, any additional options used by the project are turned on automatically. Users new to Logic Pro can start working with basic features and a streamlined interface. In particular, users familiar with GarageBand will find a direct match for nearly all GarageBand features.

All windows, views, menus, and key commands required for standard music production tasks are accessible in the app. You turn on advanced tools by selecting Show Advanced Tools in the Advanced preferences pane. Turning on advanced tools without turning on any of the specific additional options lets you do the following:. Additional Options When Show Advanced Tools is selected, additional options providing further expert capabilities become available, and can be selected individually depending on the type of tasks you want to perform.

When Show Advanced Tools is selected in the Advanced preferences pane, the following additional options are also available:. For users upgrading to Logic Pro X, any additional options used by an existing project are turned on by default when you open the project.

Turn on Additional Options 1. Select any of the specific additional options you want to use. Some features are only available when Show Advanced Tools is turned on, or when the corresponding Additional Options checkbox is selected. If a project makes use of features for example, Track Stacks that can only be created or edited when the Show Advanced Tools checkbox is selected, items using the feature will still play when Show Advanced Tools is turned off.

Features that need Additional Options to be selected have this icon. Undo and redo edits in Logic Pro You can undo one or more edit operations, and redo undone edits. Logic Pro includes an Undo History window with a time-ordered list of all edits that can be undone. You can also change the number of steps that can be undo in Logic Pro preferences. You can undo virtually any edit, including moves, deletions, renaming, and parameter changes; and the creation of new events, regions, channel strips, and more.

The Undo History window displays a list of all actions that can be undone. The most recent editing operation, which will be the first to be undone, is selected. No undos or redos are possible for the deleted steps, once the Undo History has been deleted. Change the number of undo steps 1.

Change the number in the Number of Undo Steps value slider. Manage Logic Pro content Logic Pro features an extensive Sound Library of Apple Loops, patches, drum kits, and other content that you can use in your projects. Preview it. There are also a few free books. Want to start with GarageBand first?

Graphically Enhanced Manuals. Your books can be considered as a reference model for software manuals. Create organic-sounding acoustic drum tracks or electronic beats with the intelligent technology of Drummer. Choose from dozens of drummers who each play in a different musical genre, and direct their performances using simple controls.

Logic Pro X turns your Mac into a professional recording studio able to handle even the most demanding projects. Capture your compositions and performances — from tracking a live band to a solo software-instrument session — and flow them into your songs. Seamless punch recording. Automatic take management.

Logic Pro X makes it all easy to do — and undo. You can create projects with up to stereo or surround audio tracks and up to software instrument tracks, and run hundreds of plug-ins.

Logic Pro X goes beyond the average sequencer with an advanced set of options that let you record, edit, and manipulate MIDI performances. Transform a loose performance into one that locks tight into the groove using region-based parameters for note velocity, timing, and dynamics. As your song develops, Logic Pro X helps organize all your ideas and select the best ones. Group related tracks, audition alternate versions, and consolidate multiple tracks.

Leave a Reply

Your email address will not be published.